Cover Image
close this bookQuality Control Guidelines - Fibre or Micro Concrete Tiles (SKAT, 1991, 79 p.)
View the document(introduction...)
View the document1. Introduction
Open this folder and view contents2. Raw materials
Open this folder and view contents3. Production process
Open this folder and view contents4. End control
View the document5. Further readings
View the documentAnnex 1 - Summary of tests
View the documentAnnex 2 - Preparing sample sand
View the documentAnnexes related

Annex 2 - Preparing sample sand

For any test to be undertaken the sample sand should represent a good average of the stock. When the sand is stored, finer particles tend to separate out a bit. Therefore take sand from at least 6 different places in the deposit and place it on the floor in a heap. Part this heap into four parts, take two parts away and make a new heap. Part the second heap into four parts and take two parts away. Take about 200 g of the remaining parts for testing.


Figure