Cover Image
close this bookMaking of Parquetry - Course: Timberwork techniques. Instruction examples for practical vocational training (Institut für Berufliche Entwicklung, 24 p.)
View the document(introduction...)
View the documentPreliminary Remarks
View the documentInstruction Example 7.1.: Determining the Material Requirement of Single Parts of Parquetry for a Given Room
View the documentInstruction Example 7.2.: Laying of Mosaic Parquetry
View the documentInstruction Example 7.3.: Laying of Parquetry - Technique: pasted on solid ceiling, belt or ship’s bottom pattern, parquetry-fillet with fixed tongue
View the documentInstruction Example 7.4.: Laying of Parquetry - Technique: nailed on planed boarded floor, belt or ship’s bottom pattern, parquetry-fillets with movable tongues
View the documentInstruction Example 7.5.: Finishing and Sealing of Parquetry

Instruction Example 7.1.: Determining the Material Requirement of Single Parts of Parquetry for a Given Room

Practising material calculations for determining the required number of single parts of parquetry.


Figure

Measuring and testing means

Folding rule, steel tape measure

Auxiliary accessories

Pocket calculator, paper, pencil

Required basic knowledge

Using length measuring instruments, mastering fundamental operations such as multiplying and dividing

Explanations to the working drawing

1 Mosaic parquetry-fillet
2 Parquetry-fillet
3 Surface of the room to be calculated

Sequence of operations

Comments

1. Preparing writing paper, pencil and measuring equipment.

Taking this equipment to the room that shall be measured.

2. Measuring the dimensions of the room and writing them down on a hand drawing.

Making the free-hand sketch in the room itself (“on the spot”).

3. Calculating the surface of the room

The calculations should be made at a working table with seats.
Using a pocket calculator is recommended.

given:
- dimensions of the room
- dimensions of the surfaces of the parquetry-fillets


to be determined:
- required number of mosaic parquetry-fillets
- required number of parquetry-fillets


F1 = a · b
F1 = 5030 mm · 5500 mm
F1 =2 765 000 mm2

F1 = surface without recess (total)

F2 = a · b
F2 = 2100 mm ·2600 mm
F2 = 5 460 000 mm2

F2 = surface of the recess

FR = F1 - F2
FR = 27 665 00 mm2 - 5460 000 mm2
FR = 22 205 000 mm2

FR = surface of the room (real)

4. Calculation of the surface of the given mosaic parquetry-fillet


FMP = b · 1
FMP = 20 mm · 120 mm
FMP = 2 400 mm2

FMP = surface of the mosaic parquetry-fillet

5. Calculation of the surface of the given parquetry-fillet


FSP = b · 1
FSP = 60 mm · 400 mm
FSP = 24 000 mm2

FSP = surface of the parquetry-fillet

6. Calculation of the required number of mosaic parquetry-fillets


MP = FR : FMP
MP = (22 205 000 mm2)/( 2 400 mm2)
MP = 9252.08

MP = mosaic parquetry-fillet

9300 mosaic parquetry-fillets are required.

Rounding the number up is necessary because waste material must be considered.

7. Calculation of the required number of parquetry-fillets


SP = FR : FSP
SP = (22 205 000 mm2)/(24 000 mm2)
SP 925.21

SP = parquetry-fillet

950 parquetry-fillets are required.



Single parts of parquetry