[greenstone-users] Problems with remote access to my collection using Greenstone

DateTue, 18 Sep 2007 12:53:54 +0200
Subject [greenstone-users] Problems with remote access to my collection using Greenstone
Dear Colleagues,

I am currently working with Greenstone 2.72, with the recommended
Local Library installation, which "has a webserver built in and is
suitable for building and viewing Greenstone collection on a
stand-alone system" with "limited web servicing ability".

I have tried to establish remote access to my collection for a
few colleagues that I work with who are all connected to the local area
network (LAN) by doing the following:

while in the Greenstone server (C:Program
FilesGreenstoneserver), I opened the administration page. Then, under
"user management", I chose the "add new user" option where I created a
user name and password, which then appears on the "list of current

Finally, when I did a test to see if the remote server would
function by opening the "client-gli" function (C:Program
FilesGreenstonegliclient-gli), the following message appeared:

(Embedded image moved to file: pic28919.jpg)

After clicking the OK button, the following would appear: (Embedded image
moved to file: pic02473.jpg) and it was not possible to establish remote

Can anyone tell me how to correct this problem?? Or is my understanding
simply wrong that the local library installation will allow access to
colleagues who are connected to the same LAN as I??

Any advice or guidance will be greatly appreciated. Sincerely, Emil

Emil Wandzilak, Mr., >> AS OF 15/12/06 room E1541<<
DPA/PARB/Research and Analysis Section
United Nations Office on Drugs and Crime
PO Box 500, A-1400 Vienna, Austria, Tel: (+43-1) 26060-4279;
e-mail: emil.wandzilak@unodc.org

Type: image/jpeg
Filename: pic28919.jpg


Type: image/jpeg
Filename: pic02473.jpg