Experiment No. 4

Figure

Procedure:

1. Connect the circuit

2. Connect an signal generator to the input. Set it to 1000 Hz (sinewave) and minimum output. Connect an oscilloscope to the output terminals of the amplifier. Adjust the oscilloscope for proper viewing.

3. Set the output of the generator to the maximum undistorted amplifier output.
Measure the peak to peak input and output amplitude and record it in the table. Draw the input and output waveforms in the table.

4. Set the generator to the minimum undistorted amplifier output.
Measure the peak to peak input and output amplitude and record it in the table. Sketch the input and output waveforms in the table.