Cover Image
close this bookBiomass Gasification - Technology and Utilisation (Individual Authors)
View the document(introduction...)
View the documentOverview of Gasification Technology
View the documentBiomass as Gasification Fuel
View the documentGasification for Energy Supply
View the documentGasification History and Development
View the documentGasification Process
View the documentProducer Gas and it´s Constituents
View the documentHazards with Producer Gas
Open this folder and view contentsGas Producers (Gasifiers)
Open this folder and view contentsImpact of Fuel Properties on Gasification
Open this folder and view contentsSuitability of Some Biomass Fuels
Open this folder and view contentsProducer Gas Drive Engines
View the documentConditioning of Producer Gas
View the documentTroubles with Gasification System
View the documentLiteratures on Gasification

Producer Gas and it´s Constituents

Producer gas is the mixture of combustible and non-combustible gases. The quantity of gases constituents of producer gas depends upon the type of fuel and operating condition.


The heating value of producer gas varies from 4.5 to 6 MJ/m 3 depending upon the quantity of it´s constituents. Carbon monoxide is produced from the reduction of carbon dioxide and it´s quantity varies from 15 to 30 % by volume basis . Although carbon monoxide possses higher octane number of 106, it´s ignition speed is low. This gas is toxic in nature. Hence, human operator need to be careful while handling the gas .


Hydrogen is also a product of reduction process in the gasifier. Hydrogen posseses the octane number of 60-66 and it increases the ignition ability of producer gas. Methane and hydrogen are responsible for higher heating value of producer gas. Amount of methane present in producer gas is very less (upto 4 %). Carbon dioxide and nitrogen are non-combustible gases present in the producer gas. Compared to other gas constituents, producer gas contains highest amount ( 45-60 %)of nitrogen. The amount of carbon dioxide varies from 5 to 15 %. Higher percentage of carbon dioxide indicates incomplete reduction . Water vapours in the proudcer gas occurs due to moisture content of air introduced during oxidation process, injection of steam in gasifier or moisture content of biomass fuels.