[greenstone-users] Re: greenstone-users Digest, Vol 43, Issue 14 (Building Greenstone collections remotely)

From Ata ur Rehman
DateWed, 1 Nov 2006 11:01:47 +0500
Subject [greenstone-users] Re: greenstone-users Digest, Vol 43, Issue 14 (Building Greenstone collections remotely)
In-Reply-To (4547C35C-9000306-cs-waikato-ac-nz)
Dear Dewsnip

Please find the error log of Apache Server:


[Wed Nov 01 11:01:02 2006] [error] [client 192.168.0.3] (OS 123)The
filename, directory name, or volume label syntax is incorrect. :
couldn't create child process: 720123: gliserver.pl
[Wed Nov 01 11:01:02 2006] [error] [client 192.168.0.3] (OS 123)The
filename, directory name, or volume label syntax is incorrect. :
couldn't spawn child process: D:/Greenstone271/cgi-bin/gliserver.pl


Ata

On 11/1/06, Michael Dewsnip <mdewsnip@cs.waikato.ac.nz> wrote:
> Hi,
>
> I think you need to keep the "#!" at the start of the first line, and
> the "-w" at the end of the line, ie:
>
> #!/D:Greenstone271binwindowsperlbinperl -w
> /
> If that doesn't fix the problem, check the Apache error_log file to see
> what is going wrong.
>
> Regards,
>
> Michael
> /
> /
>
> Ata ur Rehman wrote:
>
> > Dear Michael
> >
> > I am also trying to configure GLI to build collections remotely. But
> > I think there is problem in my gliserver.pl first line code. I have
> > mentioned the full path to perl as under:
> >
> > _*gliserver.pl*_
> >
> >
> > /"D:Greenstone271binwindowsperlbinperl"/
> >
> > /# Need to specify the full path of Perl above/
> >
> > /use gsdlCGI;/
> >
> > /use strict;/
> >
> > //
> >
> > /my $authentication_enabled = 1;/
> >
> > /my $debugging_enabled = 0;/
> >
> > .........
> >
> > Is it correct?
> >
> > After these changes I request the follwoing command:
> >
> > http://ata/gsdl/cgi-bin/gliserver.pl?cmd=check-installation (ata is my
> > server name)
> > but i find the following error:
> >
> >
> >
> > Internal Server Error
> >
> > The server encountered an internal error or misconfiguration and was
> > unable to complete your request.
> >
> > Please contact the server administrator, admin@irm.edu.pk
> > <mailto:admin@irm.edu.pk> and inform them of the time the error
> > occurred, and anything you might have done that may have caused the error.
> >
> > More information about this error may be available in the server error
> > log.
> >
> > ------------------------------------------------------------------------
> > Apache/2.0.55 (Win32) Server at ata Port 80
> >
> >
> > What should I do?
> >
> >
> > Ata
> >
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: Michael Dewsnip < mdewsnip@cs.waikato.ac.nz
> > <mailto:mdewsnip@cs.waikato.ac.nz>>
> > To: "Ajax, Tim A" <TAAjax@schreiner.edu <mailto:TAAjax@schreiner.edu>>
> > Date: Fri, 27 Oct 2006 17:19:27 +1300
> > Subject: Re: [greenstone-users] Remote Librarian interface trouble
> > Hi Tim,
> >
> > Sorry for the slow reply to your e-mail... now that the Greenstone
> > 2.71
> > release is finally over, hopefully things will return to normal.
> >
> > Thanks for pointing out the errors in your Apache error log file.
> > None
> > of them represent real problems, but I've spent some time today
> > investigating them and tidying them up where possible.
> >
> > - The "script not found or unable to stat" errors are caused by Java
> > looking in various places for the dictionary.properties file. It's
> > actually in the applet JAR file, but that seems to be the last place
> > Java looks. Hopefully there is a way of telling Java the correct place
> > to look to start with.
> >
> > - The "File /opt/greenstone/collect/modelcol/metadata does not
> > exist!"
> > messages are caused by the GLI code on the server when asked to add a
> > directory that doesn't exist to a zip file. In this case, it's not an
> > error, and I plan to change the code so it only complains about
> > missing
> > files that are required.
> >
> > - The "util::mk_dir could not create directory
> > /opt/greenstone/collect/collectiontest" error is caused when the
> > gliserver.pl tries to create a directory that already exists. I have
> > fixed this problem and there is an updated version of gliserver.pl
> > available from the
> > http://www.cs.waikato.ac.nz/~mdewsnip/greenstone/remote-greenstone.html
> > <http://www.cs.waikato.ac.nz/%7Emdewsnip/greenstone/remote-greenstone.html>
> > page.
> >
> > All the best,
> >
> > Michael
> >
> >
> >
> >
> >
> > Ajax, Tim A wrote:
> >
> > >Hi,
> > >
> > >I have installed Greenstone 2.7w on a Gentoo Linux server and
> > everything
> > >appears to work fine except the remote Librarian interface. I can
> > open
> > >existing collections and apparently create new collections. There
> > are no
> > >errors listed in /opt/greenstone/etc/error.txt and I'm not
> > receiving any
> > >Java errors. However, the error log for Apache2 reads as follows
> > >
> > >[Thu Sep 21 13:50:28 2006] [error] [client (address removed) ] script
> > >not found or unable to stat:
> > /opt/greenstone/cgi-bin/dictionary.class
> > >[Thu Sep 21 13:50:28 2006] [error] [client (address removed)]
> > script not
> > >found or unable to stat: /opt/greenstone/cgi-bin/dictionary_en.class
> > >[Thu Sep 21 13:50:28 2006] [error] [client (address removed)]
> > script not
> > >found or unable to stat:
> > >/opt/greenstone/cgi-bin/dictionary_en.properties
> > >[Thu Sep 21 13:50:28 2006] [error] [client (address removed)]
> > script not
> > >found or unable to stat:
> > /opt/greenstone/cgi-bin/dictionary_en_US.class
> > >[Thu Sep 21 13:50:28 2006] [error] [client (address removed)]
> > script not
> > >found or unable to stat:
> > >/opt/greenstone/cgi-bin/dictionary_en_US.properties
> > >[Thu Sep 21 13:50:29 2006] [error] [client (address removed)]
> > script not
> > >found or unable to stat:
> > /opt/greenstone/cgi-bin/dictionary_en_NZ.class
> > >[Thu Sep 21 13:50:29 2006] [error] [client (address removed)]
> > script not
> > >found or unable to stat:
> > >/opt/greenstone/cgi-bin/dictionary_en_NZ.properties
> > >[Thu Sep 21 13:50:55 2006] [error] [client (address removed)] File
> > >/opt/greenstone/collect/modelcol/metadata does not exist!
> > >[Thu Sep 21 13:50:55 2006] [error] [client (address removed)]
> > >[Thu Sep 21 13:51:04 2006] [error] [client (address removed)]
> > >util::mk_dir could not create directory
> > >/opt/greenstone/collect/collectiontest
> > >
> > >
> > >Here is the listing for /opt/greenstone/
> > >
> > >total 108
> > >drwxr-xr-x 13 root root 4096 Sep 21 08:13 .
> > >drwxr-xr-x 5 root root 4096 Sep 20 16:29 ..
> > >-rw-r--r-- 1 root root 17976 May 31 23:36 COPYING
> > >-rw-r--r-- 1 root root 8968 May 31 23:36 READMEen.txt
> > >-rw-r--r-- 1 root root 93 Sep 21 08:15 VERSION
> > >drwxr-xr-x 2 root root 4096 Sep 21 08:15 _uninst
> > >drwxr-xr-x 6 root root 4096 Aug 2 09:59 bin
> > >drwxr-xr-x 2 root root 4096 Sep 21 14:17 cgi-bin
> > >drwxrwxrwx 5 root root 4096 Sep 21 14:17 collect
> > >drwxr-xr-x 3 root root 4096 Aug 2 10:51 etc
> > >drwxr-xr-x 9 root root 4096 Aug 2 10:50 gli
> > >drwxr-xr-x 2 root root 4096 Aug 2 09:59 images
> > >-rw-r--r-- 1 root root 1572 Aug 2 09:59 library.txt
> > >-rw-r--r-- 1 root root 227 Sep 21 08:13 log.txt
> > >drwxr-xr-x 2 root root 4096 Aug 2 09:59 macros
> > >drwxr-xr-x 4 root root 4096 Aug 2 09:59 mappings
> > >drwxr-xr-x 7 root root 4096 Aug 2 09:59 perllib
> > >-rwxr-xr-x 1 root root 4479 May 31 23:38 setup.bash
> > >-rwxr-xr-x 1 root root 741 May 31 23:38 setup.csh
> > >drwxr-xr-x 2 root root 4096 Aug 2 09:59 tmp
> > >
> > >
> > >Here is the listing for /opt/greenstone/cgi-bin/
> > >
> > >total 6220
> > >drwxr-xr-x 2 root root 4096 Sep 21 14:17 .
> > >drwxr-xr-x 13 root root 4096 Sep 21 08:13 ..
> > >-rw-r--r-- 1 root root 210195 May 31 23:38 CGI.pm
> > >-rw-r--r-- 1 root root 90 May 31 23:38 getior
> > >-rwxr-xr-x 1 root root 27651 Sep 21 08:57 gliserver.pl
> > >-rw-r--r-- 1 root root 5426 May 31 23:38 gsdlCGI.pm
> > >-rw-r--r-- 1 root root 1032 May 31 23:38 gsdlsite.cfg
> > >-rwxr-xr-x 1 root root 3794480 May 31 23:38 library
> > >-rwxr-xr-x 1 root root 2273908 May 31 23:38 oaiserver
> > >-rw-r--r-- 1 root root 3195 May 31 23:38 readresults.cgi
> > >-rw-r--r-- 1 root root 3240 May 31 23:38 savereport.cgi
> > >-rw-r--r-- 1 root root 1344 May 31 23:38 trackreport.cgi
> > >-rw-r--r-- 1 root root 4031 May 31 23:38 usabcgi.pm
> > <http://usabcgi.pm/>
> > >
> > >Here is the listing for /opt/greenstone/collect/
> > >
> > >total 24
> > >drwxrwxrwx 5 root root 4096 Sep 21 14:17 .
> > >drwxr-xr-x 13 root root 4096 Sep 21 08:13 ..
> > >drwxrwxrwx 7 root root 4096 Aug 2 11:57 demo
> > >drwxrwxrwx 9 root root 4096 Aug 2 09:59 modelcol
> > >drwxrwxr-x 10 apache apache 4096 Sep 21 13:51 collectiontest
> > >
> > >Thanks for any help,
> > >Tim
> > >
> > >Tim Ajax
> > >Technology Department
> > >Schreiner University
> > >
> > >_______________________________________________
> > >greenstone-users mailing list
> > >greenstone-users@list.scms.waikato.ac.nz
> > <mailto:greenstone-users@list.scms.waikato.ac.nz>
> > > https://list.scms.waikato.ac.nz/mailman/listinfo/greenstone-users
> > >
> > >
> > >
> > >
> >
> >
>
>