Re: [greenstone-devel] Greenstone installation problem

From Katherine Don
DateFri, 02 Feb 2007 10:03:29 +1300
Subject Re: [greenstone-devel] Greenstone installation problem
In-Reply-To (5i593l$21395a-ip02-eastlink-ca)
Hi Tayze

Is gwcgi set in the gsdlsite.cfg file (its commented out by default).
If its not set, you could try setting it to /cmidocs/cgi-bin/library (or
/cgi-bin/library or other value) and see if that helps.

Regards,
Katherine

Tayze MacKenzie wrote:
> Hi Michael thanks for the reply. I don't see anything out of the ordinary
> in that file. Here are the settings you had mentioned ...
>
> gsdlhome "/home/cmidocs/public_www/gsdl"
> httpprefix /gsdl
> httpimg /gsdl/images
> maxrequests 10000
>
> I noticed that there are only 3 files in the
> /home/cmidocs/public_www/cgi-bin folder (gsdlsite.cfg, library, oaiserver)
> while the rest are in /home/cmidocs/public_www/gsdl/cgi-bin (CGI.pm,
> gliserver.pl, resdresults.cgi, trackreport.cgi, getior, gsdlCGI.pm,
> savereport.cgi, usabcgi.pm). Is this correct?
>
> Thanks again,
>
> Tayze
>
> -----Original Message-----
> From: Michael Dewsnip [mailto:mdewsnip@cs.waikato.ac.nz]
> Sent: January 25, 2007 4:31 PM
> To: R. Tayze MacKenzie
> Cc: greenstone-devel@list.scms.waikato.ac.nz
> Subject: Re: [greenstone-devel] Greenstone installation problem
>
> Hi,
>
> This sounds like something is wrong in the Greenstone
> "cgi-bin/gsdlsite.cfg" file -- check that the "gsdlhome", "httpprefix"
> and "httpimg" settings are correct.
>
> Regards,
>
> Michael
>
>
>
> R. Tayze MacKenzie wrote:
>
>
>>Here's the problem we're having ...
>>
>>We have successfully loaded the greenstone software and created several
>>collections on a windows machine but are having dificulty getting it to
>
> work on
>
>>a network server. When performing the install most of the default options
>
> were
>
>>chosen. The exceptions were:
>>
>>The installation directory - it was installed to /home/cmidocs/public_www
>
> (web
>
>>address - http://docs.informatics.management.dal.ca/gsdl)
>>
>>An existing cgi-bin directory was used - /home/cmidocs/public_www/cgi-bin
>
> (web
>
>>address - http://docs.informatics.management.dal.ca/cmidocs/cgi-bin)
>>
>>
>>The first page
>>(http://docs.informatics.management.dal.ca/cmidocs/cgi-bin/library) loads
>
> but
>
>>all links on that page are incorrect. Rather than point to the above
>
> script
>
>>they link to
>>http://docs.informatics.management.dal.ca/cmidocs/cgi-bin/cmidocs/library?.
>
> ..
>
>>which has an extra "cmidocs" appended after the "cmidocs/cgi-bin".
>>
>>I have attempted to look at the installer's guide and developer's guide to
>
> find
>
>>out what setting to change with no luck as of yet. Could you please advise
>>what change I need to make or whether I need to delete the current
>
> installation
>
>>and re-install with diferent parameters.
>>
>>Thanks for your help,
>>
>>Tayze MacKenzie
>>
>>
>>R. Tayze MacKenzie
>>MBA (Candidate)
>>Dalhousie University
>>R.Tayze.MacKenzie@dal.ca
>>(902) 843-0196
>>
>>_______________________________________________
>>greenstone-devel mailing list
>>greenstone-devel@list.scms.waikato.ac.nz
>>https://list.scms.waikato.ac.nz/mailman/listinfo/greenstone-devel
>>
>>
>>
>>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> greenstone-devel mailing list
> greenstone-devel@list.scms.waikato.ac.nz
> https://list.scms.waikato.ac.nz/mailman/listinfo/greenstone-devel