Re: [greenstone-devel] Word .doc conversion fails after system upgrade From: Mariana Pichinini Date: Fri, 12 Oct 2007 17:09:26 -0300

Re: [greenstone-devel] Word .doc conversion fails after system upgrade

From	Mariana Pichinini
Date	Fri, 12 Oct 2007 17:09:26 -0300
Subject	Re: [greenstone-devel] Word .doc conversion fails after system upgrade
In-Reply-To	(470EA77C-4040604-dlconsulting-com)
Thanks a lot, Richard We did it last week; but we found that wvWare would need also an update. Only when we did it so, everything went right. What we did was to symlink wvWare from /usr/bin to the bin/ folder in the Greenstone installation. So, when wvWare is updated, we don't need to worry about copying it to Greenstone installation. Thanks again Mariana __________________________________________________ BIBHUMA Biblioteca de Humanidades Facultad de Humanidades y Ciencias de la Educación Universidad Nacional de La Plata ----- Original Message ----- From: Richard Managh To: greenstone-devel@list.scms.waikato.ac.nz Sent: Thursday, October 11, 2007 7:45 PM Subject: Re: [greenstone-devel] Word .doc conversion fails after system upgrade Hi Mariana, I would first suggest you ensure you have the most recent version of iconv installed for your debian version, if not update it. Then if that doesnt work, please tell us which exact Debian distribution you are running. Regards, Richard Mariana Pichinini wrote: Hi fellows We have a Debian Server hosting the Greenstone 2.70 version. The server needed a huge upgrade, and we did so last week to kernel 2.6.22-2 and also the majority of system applications. Since then , the import process for Word documents fails. This is part of the error log: Diagnostic: (text.c:867) iconv_open fail: 22, cannot convert CP1252 to unicode Diagnostic: (text.c:867) iconv_open fail: 22, cannot convert CP1252 to unicode Diagnostic: (text.c:867) iconv_open fail: 22, cannot convert CP1252 to unicode Diagnostic: (wvWare.c:1276) picture 0x01 here, at offset 0 in Data Stream, obj is 0, ole is 0 Diagnostic: (picf.c:190) Old Graphic Diagnostic: (picf.c:193) X is 1b86 Magick Warning: MNG features are not allowed in a PNG datastream (null) Diagnostic: (text.c:867) iconv_open fail: 22, cannot convert CP1252 to unicode Diagnostic: (text.c:867) iconv_open fail: 22, cannot convert CP1252 to unicode Diagnostic: (text.c:867) iconv_open fail: 22, cannot convert CP1252 to unicode Diagnostic: (text.c:867) iconv_open fail: 22, cannot convert CP1252 to unicode Diagnostic: (text.c:867) iconv_open fail: 22, cannot convert CP1252 to unicode Diagnostic: (text.c:867) iconv_open fail: 22, cannot convert CP1252 to unicode The rest is the same (we refer to the conversion diagnostic) and the resulting Html document shows (apparently) every single character from the original 'converted' in a question mark (?). Everything was OK before upgrade, so we suspect from some weird change that affected the Greenstone installation. We installed the new 2.74 version but we still get it fail when importing. Errors are the same. We will appreciate any help or advice. Thanks in advance Mariana Pichinini __________________________________________________ BIBHUMA Biblioteca de Humanidades Facultad de Humanidades y Ciencias de la Educación Universidad Nacional de La Plata _______________________________________________ greenstone-devel mailing list greenstone-devel@list.scms.waikato.ac.nz https://list.scms.waikato.ac.nz/mailman/listinfo/greenstone-devel -- DL Consulting Greenstone Digital Library and Digitisation Specialists contact@dlconsulting.com www.dlconsulting.com _______________________________________________ greenstone-devel mailing list greenstone-devel@list.scms.waikato.ac.nz https://list.scms.waikato.ac.nz/mailman/listinfo/greenstone-devel No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.8/1064 - Release Date: 11/10/2007 03:09 p.m.