Cover Image
close this bookOperations on Smooth Miller and Thicknessing Miller - Course: Mechanical Woodworking Techniques. Instruction Examples for Practical Vocational Training
View the document(introduction...)
View the documentPreliminary Remarks
View the documentInstruction Example 2.1.: Frame Piece
View the documentInstruction Example 2.2.: Frame Piece
View the documentInstruction Example 2.3.: Frame Piece
View the documentInstruction Example 2.4.: Grating
View the documentInstruction Example 2.5.: Wall Shelf
View the documentInstruction Example 2.6.: Frame

Preliminary Remarks

This material contains six selected instruction examples which are useful for applying and improving knowledge in the field of the working techniques of milling broad and narrow faces as well as of milling to thickness and width.

In order to facilitate preparations and operations, the necessary materials, machines, measuring and testing means as well as auxiliaries are specified for each instruction example.

Furthermore, the previous knowledge is mentioned that is additionally necessary for milling broad and narrow faces as well as for milling to thickness and width. It is recommended to repeat this knowledge before starting the work.

The sequence of operations specified for each instruction example includes working steps leading to the manufacture of the relevant workpiece. This order is to be absolutely observed for reaching a good quality.

A working drawing is attached to each instruction example showing the required shapes and dimensions of the workpiece. It is also possible to choose other practising pieces with smaller or bigger dimensions.