 | Working with Driling Machines - Course: Mechanical Woodworking Techniques. Instruction Examples for Practical Vocational Training |
 |
|
Instruction Example 03.2.: Decorative Board
Manufacturing of large through holes to produce a decorative board.
Material
A planed board
|
length: |
500 mm |
|
width: |
70 mm |
|
thickness: |
20 mm |
Figure
Machines and tools
Bench or pillar drilling machine, pencil, marking gauge, awl, round shank Forstner bit Ø 30 mm
Measuring and testing means
Folding rule, stell square
Auxiliaries
Clamping means
Necessary basic knowledge
Measuring and marking
|
Sequence of operations |
Comments |
|
1. Preparing the working material |
Check for completeness |
|
2. Marking the board, determine the bore distances yourself, marking out the bore centres |
Pay attention to the bore distances to be regular! |
|
3. Clamping the drill and placing the board |
Adjusting the bore centres exactly! |
|
4. Carrying out the bores | |
|
5. Cleaning the board | |
|
6. Checking the bores |
- regularity of the bore distances |
|
7. Manufacturing a second decorative board | |
Decorative board
|
|