Cover Image
close this book Fisheries Technologies for Developing Countries
View the document Acknowledgments
View the document Preface
View the document Overview
View the document 1 Boat Design, Construction, and Propulsion
View the document 2 Fishing Methods and Gear
View the document 3 Artificial Reefs and Fish Aggregating Devices
View the document 4 Coastal Mariculture
View the document 5 Fish Processing and Preservation

Overview

Many of the fishermen in developing countries are locked into economic systems that result in relative poverty. Although the technologies they use have evolved in accord with indigenous biological resources and socioeconomic realities, there may be opportunities for improvement. Existing technologies from other developing regions might be transferred to these fisheries and some of the technological advances from industrialized countries might benefit artisanal fishermen.

This report describes some of these innovative fishing technologies for small-scale fishermen, administrators of fisheries, development assistance groups, and others concerned with fisheries The objective is to establish new contacts, to examine alternative fishing technologies, and, after careful planning, to encourage application in new areas.

 

 

SMALL-SCALE FISHERMEN

 

 

There are about 15 million traditional small-scale fishermen in the Third World, perhaps half of whom fish full time. Another 15 million people are involved in fish preservation and distribution Assuming an average family of six, close to 200 million people in poorer countries are dependent on small-scale fisheries. For these people and the many others whom they supply, fish caught by traditional methods represent their principal source of protein.

Traditional fisheries may be commercial or subsistence, but they each have in common a small cash income. Fishermen of this sector often live in isolated coastal villages and may also be engaged in subsistence agriculture. In many societies, artisanal fishermen occupy the lowest social and economic class.

The fisherman's main wealth is in his fishing gear (boats, motors, nets, and lines), which is subject to rapid depreciation and loss. Fishermen either construct their own boats and assemble their gear or purchase them from village experts. In some cases, their small boats are powered with outboard gasoline motors, although sail and paddle power are common. Fishing practices tend to be labor intensive with minimal mechanical assistance. The total investment in fishing equipment is generally quite low, and the artisanal fisherman is quite adept at minimum input management.

Fishing productivity in the artisanal sector is consequently variable and low; many fishermen catch only one or two tons of fish per year. Nevertheless, the fish catch per ton of fuel consumed is much higher than in the industrial sector. The catch is rarely distributed in organized markets; more often it goes to local markets or is consumed by the fishermen's family.

 

 

PROBLEMS OF SMALL-SCALE FISHERMEN

 

 

Artisanal fishermen face a series of difficulties that contribute to their marginal standard of living. Government fishery policies often tend to concentrate resources in the modern, large-scale, commercial fisheries that earn foreign exchange. Thus, the small-scale fisherman finds it difficult or impossible to obtain credit, extension services, marketing assistance, or similar aid from development programs.

Traditional fishermen often compete with the industrial sector over limited common resources in the exclusive economic zone and commonly lose against more efficient technologies Numerous conflicts between these two types of fisheries occur. Typically, trawlers enter areas used by artisanal fishermen, destroying spawning and feeding areas, and damaging their buoys, nets, and traps. Further, the by-catch from inshore shrimp trawlers is often discarded, both removing the resource from the small-scale effort decreasing the availability of protein.

In many coastal zones, overexploitation of marine resources is already a serious problem that is augmented by low productivity. It heightens the conflicts between the industrial and traditional fisheries and endangers the economic and nutritional status of people who rely on the traditional fisheries.

Fish stocks may also be depleted by pollution from urban areas, industry, or mining; this more seriously affects small fishermen who have only limited mobility. Mangrove destruction, which removes vital spawning grounds, is also detrimental to coastal fish stocks.

In addition to biological overfishing and stock depletion, economic overfishing often plagues the small-scale sector. Excessive use of boats, fuel, and gear may double the effort needed to catch a limited amount of fish.

Market access is impeded by lack of credit, capital, and transportation. Moreover, the small-scale fishermen's lack of organization precludes them from influencing the market. The unavoidable dependence on middlemen for the means of production and marketing is often a great liability.

In other situations, the artisanal fisherman's reliance on less than optimal fishing vessels, methods, and gear may limit his catch, especially when he is competing with the industrial sector. The lack of adequate landing and processing facilities exacerbates heavy losses from wastage and makes selling fish outside the local area difficult.

Boat construction is a growing problem for many fishermen. The traditional dugout canoe, proa, and catamaran used for fishing and marine transportation require high-quality hardwood. With deforestation of many tropical coastal areas, these strong, workable, long-lived woods are increasingly scarce.

Many artisanal fishermen have adopted outboard motors, and sail technology has fallen into disuse. Outboard gasoline motors are expensive, difficult to repair, and not fuel efficient. Their costs can seriously restrict fishing operations. In West Africa, the lack of foreign exchange to purchase spare parts, replacement motors, and fuel has resulted in a decrease in the percentage of motorized small-scale fishing boats.

 

 

INNOVATIVE TECHNOLOGIES

 

While recognizing the diverse problems faced by the small-scale fisherman in the Third World, this report will primarily address technological considerations. Innovative, relatively inexpensive technologies that, under some circumstances, might help fishermen will be described. Although not necessarily the newest, most sophisticated developments, these techniques may have already found successful application in a specific region. A technology might be successfully adapted to a new area if it solves a specific problem, causes no ecological or social problems, and is economically feasible and desired by the community it is intended to serve. Successful applications of new mechanical or fabrication technologies also require training, service support, and locally available components and spare parts.

There are no universal answers in fisheries technologies. Each fishery should be studied individually to determine the technologies that are applicable to its specific conditions.

 

 

Boats

 

Traditional fishing vessels are highly adapted to the fishing techniques and marine conditions of a specific region. This coordination between structure and function is not without problems, however. Small fishing boats often have a limited range of operations and are unsafe. They may lack structures to store and protect the catch. The high-quality timber used for boat construction in many tropical areas is increasingly scarce. Thus, in some regions there may be a stimulus for modifications in vessel design and construction materials.

High-quality timber and planks may be replaced by laminated wood composites (plywoods) preserved and sealed with resins. Plywood pieces can be wired together with galvanized soft-iron wire and then sealed with epoxy resins in the "stitch-and-glue" technique. Plywood boats are strong and light and are used in many parts of the world.

New construction techniques use veneers or thin plywood strips to build up a laminated hull over a mold. The veneer layers are oriented diagonally to each other and glued with epoxy resins. Plywood or fast-growing woods can be used in these rapid construction methods.

Rafts made from plastic tubes have become widely accepted in Taiwanese coastal fisheries, as have ferrocement vessels in Cuba and China.

Fiberglass is another increasingly popular material for boat construction because of its light weight, longevity, and strength. The United Nations Food and Agriculture Organization's Bay of Bengal program has adapted a fiberglass version of the traditional vu, a wooden outrigger. A number of fiberglass modifications of traditional West African fishing vessels have also been designed by the Yamaha Motor Company of Japan.

Alternative hull forms have gained popularity in some regions. Multihulled vessels or outriggers, traditionally found in the South Pacific and Southeast Asia, offer certain advantages for small-scale fisheries: they are stable, can be beached, and have a large working deck.

The outboard gasoline motor, widely used in small-scale fisheries throughout the world, is not very fuel efficient. Fuel is expensive, a high level of maintenance is required, and spare parts are scarce. Fishing vessels are frequently overpowered and waste fuel, in part because of the fishermen's desire for high speed to increase their range or competitiveness.

Fuel savings can be achieved by employing more efficient motors or using alternative fuels. Diesel-powered outboard and inboard motors have longer lifetimes than their gasoline counterparts and may be more economical. However, their high initial cost may be prohibitive to the small fishermen.

Gasifier technology has been developed in the Philippines and applied to fishing boats. Charcoal is burned with limited oxygen supply to produce a gaseous mixture of hydrogen, carbon monoxide, and methane, which can be used to fuel gasoline engines. Steam engines are also being investigated as power sources for small boats.

The oldest propulsion technique, wind power, is being reintroduced in a number of small-scale fisheries. Sails may be used as the main means for propulsion or to assist an engine. Fishermen can take advantage of the winds, thus saving fuel and reducing operating costs. Having an alternative propulsion source also increases the crew's safety. The details of sail-assist are specific for each fishery, since marine conditions, fishing vessels, and methods all vary.

The sails may be constructed of very inexpensive materials, such as canvas bags or the plastic sheeting used by kattumaran fishermen in Southern India. These sails last for many months, and can be easily repaired or replaced.

The Bay of Bengal program in India and Sri Lanka has reintroduced sailing rigs to small fishing vessels with positive results. A great deal of work has also gone into fitting sails to West African fishing canoes.

The high stability of catamarans permits them to carry larger sail areas than equivalent monohulls. Experimental fishing catamarans using sails have been adopted in India, West Africa, and the South Pacific.

 

 

Fishing Methods and Gear

 

The time-tested fishing methods are usually ideal for a given region since they have evolved to best fit such local requirements as the species to be captured and the desired size, the type of coast, and the marine conditions. Changing conditions may dictate new approaches, however. Modernizing factors are always a consideration for every traditional fishing method or gear. Moreover, successful fishing arts could be transferred from one region to another if conditions were comparable. There are numerous examples of innovative fishing arts being used in the Third World that are unknown several hundred miles away. New technologies could tap previously unexploited resources or allow small-scale fishermen to compete more effectively with the industrial sector.

Longlines, successfully used in many areas, offer great potential for the small-scale fishermen. These unwatched lines with multiple hooks attached to branch lines (snoods) may be set vertically or horizontally and can be anchored or allowed to drift. Modernization of this art involves the mechanization of hauling, the use of detachable snoods and polyethylene lines that float just off the bottom, and the introduction of light-emitting lures, which may help to increase the catch.

Pots and traps are universal and have the advantage of low cost and minimal inputs. They are highly specific to species and sizes, and their placement requires knowledge of the local conditions. Modernization in these fisheries is manifested by the use of more durable construction materials than traditional woods and fibers. Thus, modern Japanese octopus pots are constructed of sections of PVC pipe. Loss of traps or pots can be minimized by attaching them to longlines or by installing time release devices (pop-ups).

Light attraction of fish could be employed in many parts of the world. It is now used on Lake Tanganyika to attract fish to the opening between the two hulls of a catamaran. A liftnet captures the fish after they have been concentrated. In the Caspian Sea, light is also commonly used to attract fish to liftnets.

Trawling is a fishing technique usually restricted to industrial fisheries. However, two small boats with 5-hp motors can pair trawl, pulling the net together and thus compete with larger trawlers for benthic species.

 

 

Artificial Reefs

 

Fish concentrate around submerged objects such as reefs, rocks, logs, and harbor structures. Fishermen have observed this and built artificial underwater structures to concentrate fish stocks. Artificial reefs are common in many traditional fisheries. Modern technologies may provide durable materials for these structures, but their function remains the same. Artificial reefs can be used as effective management tools. By concentrating the fish crop, fishermen can save time and fuel, thereby facilitating the catch.

Bundles of brush are placed in secluded coastal areas in West Africa, Cuba, and the Philippines to provide shelter and spawning areas for fish. Lobster shelters made of mangrove branches are prevalent in the lobster fisheries of Cuba and the Yucatan in Mexico. Traditional Japanese artifical reefs employ rock and rubble to enhance fishing grounds. Tires and cement are common materials for artificial reefs in Taiwan, the United States, and Israel, whereas the Japanese invest in sophisticated fiberglass, concrete, and steel modules.

Thailand's Department of Fisheries conducts an artificial reef program whose objective is to enhance fishing grounds for artisanal fishermen. Concrete trawler exclusion modules, which damage trawling nets of industrial fisheries, have also been deployed.

Artificial reefs are placed on the sea floor; fish aggregating devices (FADS) are used at the surface or suspended in the water column to attract pelagic species. Japanese fisheries employ floating bamboo shelters to attract dolphin fish or tuna. Philippine payaos are tuna-attracting bamboo rafts with palm fronds that are anchored in deep water. Modern FADs are constructed of steel, plastic, and artificial fibers, and may be more durable than traditional structures. Nevertheless, they are easily lost in the marine environment.

 

 

Coastal Mariculture

 

 

Mariculture offers an alternative to the overexploited marine resources in many coastal regions. It is possible that some fishing communities could also become involved with sea farming to provide additional protein or income. Sea farming in underutilized coastal areas would not compete with terrestrial agriculture for space and could be implemented without large investments. This report will only address mariculture in the coastal ocean, not the much larger topic of pond cultivation.

Recent research by the Smithsonian Institution has shown the biological feasibility of algal turf mariculture in nearshore areas. Algal turfs are grown on screens and then fed to herbivores such as whelk, parrotfish, and crab.

Highly nutritious seaweeds are consumed in Asia and are also employed in industry. The red algae Eucheuma is cultured on monofilament nets on family farms in the Philippines. The edible kelp Laminaria is cultivated on longlines and floating rafts in China. Nori (Porphyra), a popular edible seaweed, is farmed on submerged nets in Japan.

Cage culture of marine fish is still in its infancy but will undoubtedly gain popularity. The cages protect the fish from predators and simplify harvesting. The limited space available to the fish ensures that they will convert feed efficiently.

Crustaceans and molluscs are widely cultured in the marine environment. Oysters, mussels, clams, and scallops are typically grown on lines, stakes, or on the bottom, in many parts of the world. The highest productivity of these animals is in off-bottom culture. Good yields of mussels have been obtained in Western Samoa. The giant clam Tridacna displays a rapid growth rate and has demonstrated good potential for mariculture in the Caroline Islands.

Integrated sea farms have been established in Indonesia and the Philippines. Houses are built on bamboo stilts over the protected reef flat where sea farmers culture seaweed, shellfish, and fish.

 

 

Fish processing

 

 

Approximately 35 percent of the world's fish catch is lost after harvesting. These losses are great in the small-scale fisheries in tropical countries. Simple preservation techniques, common in one area of the world, could be employed in others to reduce postharvest losses.

Icing is a preferred preservation technique, but since it requires gasoline or electricity, it is often expensive. The Asian Institute of Technology in Thailand has field-tested an ice-making machine that uses solar energy. Wind and biomass energy may also run refrigeration systems.

Fish may be salted by dry or wet methods, although the latter (brine and pickle) are best for tropical applications. Numerous solar driers are in use throughout the tropics. They exclude insects and develop high enough temperatures to reduce mold or bacterial spoilage. Black plastic lining in the chamber absorbs heat and initiates a flow of heated air through the drier.

Improved smokers, such as the Chorkor smoker, are gaining acceptance in West Africa. They have long lives, low construction costs, consume little firewood, and have a large fish capacity.

Other processing methods have been perfected in specific regions. Minced fish (surimi) is the starting material for a number of fishpaste products in Japan. Kamaboko—the use of cheap fish flesh for reconstituting textured marine product analogs (such as crab legs, shrimp, and lobster meat) is becoming more widespread, acceptable, and profitable. Boiling fish in water is a short-term preservation technique practiced in Southeast Asia. Fermented fish products, such as sauces and pastes, are common in South and Southeast Asia.

 

 

LIMITATIONS

 

This report treats fishing technology alone, as if it were isolated from biological, economic, cultural, and political considerations. The constraints of the small-scale fisherman in the Third World are usually socioeconomic and rarely due simply to the absence of a specific technology. Those who are involved in the introduction of technologies must be sensitive to the complete environment of the fisherman. Some of these interconnected considerations influencing the transfer of fishing technology include biological, economic, and social factors.

 

 

Biological Factors

 

 

Before any innovative marine technology is introduced, the marine resources to be exploited should be identified and assessed. Their temporal and spatial distribution, population dynamics, behavior, and life history should all be known. Sufficient stocks must be available to support the increased fishing effort.

At present, many coastal marine species are biologically overfished by the existing technologies. If this is the case for the fishery in question, there is certainly no need to introduce more efficient fishing technologies that would further exceed the maximum sustainable yield. A new technology will create an impact on the fish stocks. The magnitude of the impact should be determined so that effective management programs could be revised or initiated.

 

 

Economic Factors

The introduction of new technologies involves investment of capital. Artisanal fishermen will only embrace and continue to use new technologies that satisfy their own economic interests. Any increased capital, or operating or maintenance costs must be balanced by an increased catch, which translates into increased profit. Careful cost-benefit analyses, feasibility studies, and pilot projects must be undertaken to ensure that this is the case.

The new technology must also be carefully compared with and evaluated against current technologies to ascertain that it is more successful and is worth the increased investment. If it is determined that there is an overinvestment in boats, gear, and fuel (economic overfishing), it may not be wise to introduce a new technology.

Most small-scale fishermen operate with an economic philosophy of minimal input management. That is, they invest as little as possible and hope for a maximum return. This method of operation must be understood by those working in fisheries development.

Credit must be available to the artisanal fishery sector with conditions of financing that are culturally acceptable and economically reasonable for the fisherman. The specific situation would determine the most appropriate structure for extending credit and whether the primary beneficiary of the credit is the individual fisherman or a fishing cooperative.

The regional economic stituation must be considered in addition to the economics of the new technology. It must be determined whether the processing and storage, transportation, and marketing infrastructure are adequate to handle an increased catch.

 

 

Social Factors

The successful introduction of technology requires a keen understanding of the cultural intricacies of a society. A technological innovation or modernization must be compatible with the existing social organization and managerial level if it is to be adopted by the community. The community's concepts of ownership of private property and tenure of the marine resources must be clearly understood by outsiders who are working in fisheries development.

The social implications of the new technology must also be carefully considered. Perhaps there will be conflict and competition with fishermen who continue to use the old technologies. Significant income disparities might be introduced into a close-knit, egalitarian community. Alternatively, social stratification could be exacerbated if only the wealthier fishermen were to benefit from the new technology. A new capital-intensive technology could also require less manpower and create unemployment. Since technology implies knowledge and knowledge translates into power, there could be significant power shifts in the commmunity as a result of the introduction.

It must be determined if the community's social fabric is resilient enough to withstand these increased tensions or if, perhaps, the increased social stress caused by the technology would negate its benefits.

The successful acceptance of a new technology by small-scale fishermen will depend on the participation of the fishermen in the choice of technology, their belief in its economic feasibility, the manner of its introduction, the technology's demonstrated success, and its modification to meet the unique local conditions.

 

 

SELECTED READINGS

Ben-Yami, M. 1984. Checking the march of technology. World Fishing 33(10):5-6.

Ben-Yami, M. 1984. Technology transfer. World Fishing 33(9):4-5.

Ben-Yami, M., and A. M. Anderson. 1985. Community Fishery Centers: Guidelines for Establishment and Operation, FAO, Rome' Italy.

Compte, M.C. 1984. Too many fishermen? Ceres 17(1):33-36.

Garcia, S. 1986. A highly successful seasonal trawling ban: the Cyprus effect. ICLARM Newsletter 9(1):3-4.

Johannes, R. El. 1978. Traditional marine conservation methods in Oceania and their demise. Annual Review Ecological Systems 9:149-164.

Johannes, R. E. 1981. Working with fishermen to improve coastal tropical fisheries and resource management. Bulletin of Marine Science 31(3):673680.

Kurien, J. 1986. Netting a decent living. International Agricultural Development 6(3):10-11.

Neal, R. 1982. Dilemma of the small-scale fishermen. ICLARM Newsletter 5(3):77-79.

Panayotou, T. 1985. Small-Scale Fisheries in Asia: Socioeconomic Analysis and Policy. IDRC-229e, International Development Research Centre, Ottawa, Canada.

Pauly, D. 1985. Artisanal fishing and environmental conservation in Southeast Asian Seas. Wallaceana 41(9):3-5.

Perera, L. C. 1985. Problems of the fishermen in Bangladesh. ADAB News 12(6):11-23.

Phinney, R. 1986. Big boost for infant fishery industry (in Vanuatu). Agricultural Information Development Bulletin 8(3):2-3.

Platteau, J. P. 1985. Marine fishing and agriculture: a contrasting picture. Appropriate Technology 23(3):13-15.

Poggie, J. J. 1980. Small-scale fishermen's psychocultural characteristics and cooperative formation. Anthropological Quarterly 53:20-28.

Pollnac, R. B. 1982. Sociocultural aspects of technological and institutional change among small-scale fishermen. Pp. 225-247 in Modernization and Marine Fisheries Policy, J. R. Maiolo and M. K. Orbach (eds.) Ann Arbor Science, Ann Arbor, Michigan, USA.

Pollnac, R. B. 1985. Social and cultural characteristics in small-scale fishery development. In Putting People First, M. M. Cernea (ed.). Oxford University Press, New York, USA.

Posner, G. S., and J. Sutinen. 1984. Overfisheed Stocks, Undernourished People, and Underbenefited Coastal States of West Africa. Opportunities for Marine Fisheries Management and Development. U.S. Agency for International Development, Washington, D.C., USA.

Smith, I. 1979. A research framework for traditional fisheries. ICLARM Neusletter 3(3):3-4.

Stevenson, D., R. Pollnac, and P. Logan. 1982. A Guide for the Small-Scale Fishery Administrator: Information from the Harvest Sector. International Center for Marine Resource Development, Kingston, Rhode Island, USA.

Thomson, D. 1985. Conflict within the fishing industry: large-scale vet small-scale. Appropriate Technology 12(3):1-4.