Electrical Machines - Basic vocational knowledge (Institut für Berufliche Entwicklung, 144 p.)
 7. Single-phase alternating current motors
 7.1. Single-phase asynchronous motors (single-phase induction motors)
 (introduction...) 7.1.1. Assembly and operating principle 7.1.2. Operational behaviour 7.1.3. Technical data

7.1.3. Technical data

Several examples of technical data feature in Figures 116 and 117 and in Surveys 16 and 17.

Foot induction motors

Figure 116 - Dimensional images of a foot induction motor (e.g. 65/IM 1001)

(1) Length side, (2) Drive side
1 Axial pressure, 2 Stop socket Pg9, 3 Protective conductor, 4 Air entry, 5 Minimal distance

Survey 16 - Characteristic values of foot induction motors

 Design/nominal size Rated voltage (Ws) Rated current Power input Power output Speed - V A W W rpm 65/IM 1001 220 0.30 60 10 1400 0.42 80 16 2800 1) 220/380 0.38/0.22 70 16 1400 0.49/0.28 105 25 2800 75/IM 1001 220 0.52 100 25 1400 0.62 125 40 2800 220/380 0.59/0.34 110 40 1400 2) 0.73/0.42 160 60 2800

1) C = 2µF 2) C = 2.5µF

Flange induction motors

Figure 117 - Dimensional images of a flange induction motor (e.g. 75/IM 3601)

(1) Length side, (2) Drive side,
1 Air entry, 2 Screw-in depth max. 12 mm

Survey 17 - Characteristic values for flange induction motors

 Design/nominal size Rated voltage (Ws) Rated current Power input Power output Speed - V A W W rpm 65/IM 3601 220 0.38 1) 80 16 1400 0.50 2) 100 25 2800 220/380 0.42/0.24 75 25 1400 0.56/0.32 115 40 2800 75/IM 3601 220 0.58 3) 120 40 1400 0.74 4) 150 60 2800 220/380 0.70/0.40 150 60 1400 1.08/0.60 200 90 2800

1) C = 2µF 2) C = 3µF 3) C = 5µF 4) C = 6µF