Protective Measures against Hazardous Contact Voltage - Course: Basic skills and knowledge of electrical engineering. Methodical guide for instructors (Institut für Berufliche Entwicklung, 13 p.): 2. Organizational Preparation: 2.1. Preparation of the Instruction about Industrial Health and Safety

Protective Measures against Hazardous Contact Voltage - Course: Basic skills and knowledge of electrical engineering. Methodical guide for instructors (Institut für Berufliche Entwicklung, 13 p.)

(introduction...)

1. Aims and Contents of Practical Vocational Training in the Field of ''Protective Measures against Hazardous Contact Voltage''

2. Organizational Preparation

(introduction...)

2.1. Preparation of the Instruction about Industrial Health and Safety

2.2. Preparation of the Teaching Aids

2.3. Preparation of the Working Means

2.4. Time Planning

3. Recommendations for Practical Vocational Training in the Working Techinques of ''Protective Measures against Hazardous Contact Voltage''

(introduction...)

3.1. Introductory Instructions, Demonstrations and Exercises

3.2. Recommendations for Working with the Instruction Examples for Practical Vocational Training

3.3. Examples for Recapitulation and Tests

2.1. Preparation of the Instruction about Industrial Health and Safety

Before starting the exercises, a brief instruction should be given about the proper use and handling of the working means and how to avoid accidents.

As a proof of these instructions on industrial health and safety standards it is recommended to keep a book in which all instructions on accident-free working and proper use and handling of working means are entered in brief outlines.

The trainees confirm by signature that they were taught.

The following hints should be included:

- Every work in and at electrical plants has to be carried out in dead condition.
- The dead condition has to be checked with the help of testing instruments.
- Make sure that the plant is not reconnected by other people.
- If test work is necessary in alive plants, there must be one supervisor to look after the person carrying out the work.
- All works in connection with protective measures have to be carried out especially carefully.
- How to act after accidents caused by electric current.

Perhaps further hints on industrial health and safety are to be given according to the local requirements