Instruction Example 4.3. Testing of the Protective Measure of ''Protective Conductor System''

Protective Measures against Hazardous Contact Voltage - Course: Basic skills and knowledge of electrical engineering. Instruction examples for practical vocational training (Institut für Berufliche Entwicklung, 15 p.)

		(introduction...)
		Introduction
		Instruction Example 4.1. Preparation of a Potential Equalitation
		Instruction Example 4.2. Testing of the Protective Measure of ''Protective Insulation''
		Instruction Example 4.3. Testing of the Protective Measure of ''Protective Conductor System''

(introduction...)

Institut fufliche Entwicklung e.V.

Original title:

Lehrbeispiele f berufspraktische Ausbildung
"Schutzmaahmen gegen zu hohe Bersspannung"

Author: Gerhard Klix

First edition © IBE

Institut fufliche Entwicklung e.V.
Parkstra 23

13187 Berlin

Order No.: 91-33-3104/2

Introduction

The present material contains 3 selected instruction examples on the basis of which essential skills shall be exercised in the field of protective measures against hazardous contact voltage.

Since these protective measures against hazardous contact voltage are mastered only by much practice, the instruction examples have to be repeated continuously.

In order to facilitate the preparation and accomplishing of the exercises, for each instruction example - if required - the necessary materials, measuring and testing tools, auxiliary means and basic knowledge are mentioned, which must be available to carry out the tasks.

In addition to the sequence of operations, sketches are enclosed illustrating the carrying out of the exercises.

Instruction Example 4.1. Preparation of a Potential Equalitation

Material

Potential equalization bar,
Pipe clips of the required size,
Potential equalization lines of the required lengths and cross section

Working tools

Screw driver, wrench, round-nose-pliers, wire brush, cable stripper, soldering iron or blow lamp for soldering

Measuring and testing tools

.Folding rule

Auxiliary means

Cable fixing clips, cable eyes, flux, tin-base solder, flameproofing tape, insulating tubing or winding tape, anti-corrosive grease

Required basic knowledge

Knowledge of the necessity of potential equalization, measuring, application of pipe clips, working at, fixing and connecting of lines

Sequence of operations	Comments
1. Finding out which parts, building constructions and plants have to be included in the potential equalization	All conductive parts, such as pipe systems, heating systems, metal jackets, other metal constructions etc.
2. Application of the potential equalization bar
3. Determining the path of the potential equalization lines
4. Application of the pipe connecting clips	Gas and water meters in pipe systems have to be bridged!
5. Application of the cable fixing clips
6. Laying the potential equalization lines
7. Connecting the potential equalization lines
8. Testing the potential equalization	Visual inspection, measuring

Preparation of a potential equalization

Instruction Example 4.2. Testing of the Protective Measure of ''Protective Insulation''

Measuring and testing tools

Protective insulation testing instrument, insulation resistance measuring instrument

Auxiliary means

Measuring lines, test prods

Required basic knowledge

Criteria of the protective insulation, handling of measuring and testing tools, knowledge of measuring and testing processes, how to act after accidents caused by electric current

Sequence of operations		Comments
1. Visual inspection
	- Determination of the form of the protective insulation
	- No visible damage of the insulation
	- No protective conductor connections
2. Measuring
	- Testing of the protective insulation	Attention "high voltage" - observe safety instructions!
		The protective insulation must stand an alternating current test voltage of 4 kV for at least one minute. (After testing, no damage must be visible at the insulation, such as rupture, arcing or deformation.) With high voltage testing at electronically controlled machines, electronics have to be disconnected or bridged.
	- Testing the insulation resistance	The insulation resistance must be at least 1.5 megaohm with a measuring voltage of 100 V!

Testing of the protective measure of "protective insulation"