 | Residential and Non-Residential - Drinking water installations and drainage requirements in Nepal (MTC - SKAT, 1988, 188 p.) |
 |  | (introduction...) |
| | INTRODUCTION |
| | FOREWORD |
|  | PART 1 - DRINKING WATER INSTALLATIONS |
| | 1. OBJECTIVES |
| | 2. FIELD OF APPLICATION |
| | 3. TERMS AND DEFINITIONS |
| | 4. PRINCIPLES OF INSTALLATIONS |
| | 5. PARTS OF PIPELINES |
| | 6. WATER METER |
| | 7. STORAGE TANKS |
| | 8. PROTECTION AGAINST CORROSION |
| | 9. MATERIALS AND CONNECTIONS OF PIPELINES |
| | 10. POSITIONING OF PIPELINES |
| | 11. INSTALLATIONS IN BUILDINGS |
| | 12. APPARATUS AND VALVES |
| | 13. FIRE HYDRANT LINES |
| | 14. FREEZING PROTECTION |
| | 15. DIMENSIONING |
| | 16. TESTING OF A NEW INSTALLATION |
| | PART 2 - DRAINAGE REQUIREMENTS |
| | 1. SCOPE |
| | 2. FIELD OF APPLICATION |
| | 3. TERMS AND DEFINITIONS |
| | 4. PRINCIPLES OF INSTALLATION |
| | 5. PRINCIPAL REQUIREMENTS FOR PARTS OF PIPELINE |
| | 6. PRINCIPAL REQUIREMENTS FOR DRAINAGE APPLIANCES |
| | 7. PRINCIPLES FOR THE PLANNING AND FITTING OF DRAINAGE PIPES |
| | 8. SANITARY APPARATUS (Fixture, Appliance) |
| | 9. VENTILATION |
| | 10. RAIN WATER |
| | 11. MATERIALS |
| | 12. PRINCIPLES OF CALCULATION |
| | 13. DIMENSIONING |
| | 14. INSPECTION AND TESTING |
| | PART 3 - DRAWINGS/DESIGN |
| | FURTHER READINGS |
| | FURTHER PUBLICATIONS ON THIS SUBJECT IN SKAT'S BOOKSHOP |
| | BACK COVER |
(introduction...)
|
The Mechanical Training Centre (MTC) is a vocational training centre run jointly by His Majesty's Government of Nepal and the Government of Switzerland through the Directorate for Technical and Vocational Education (Nepal) and Helvetas Nepal. |
|
SKAT, Swiss Center, for Appropriate Technology, is a documentation centre and consultancy group which is engaged in promoting Appropriate Technology in the Third World. Its mail-order bookshop with more than 1200 publications in stock and its publishing help to fulfill this aim. |
|
First Edition |
1976 |
|
Second Edition |
1979, expanded content |
|
Third Edition |
1982, slightly revised |
|
Fourth edition |
1988, revised and expanded, co-published |
|
Authors |
Andreas Bachmann & Heinz Waldvogel |
|
Editor |
MTC (Mechanical Training Centre, Balaju, |
|
|
Kathmandu/Nepal) |
|
Publishers |
MTC, Balaju, Kathmandu/Nepal |
|
Copyright |
Material of this publication may be freely quoted, translated or otherwise used. Acknowledgement is requested. |
|
Comments |
Questions and comments are welcome at MTC |
|
Distributors |
in Nepal: |
|
|
outside Nepal: |
|
ISBN |
3 908001 12 9 |
|
|